{"title":"Strut Assembly","description":"\u003cp\u003eExplore \u003cstrong\u003eStrut Assembly\u003c\/strong\u003e currently listed by SUSUCAR for suspension and steering repair. This Collection brings together active listings in this category; individual product pages provide the stated application and package details.\u003c\/p\u003e\u003ch2\u003eAbout Strut Assembly\u003c\/h2\u003e\u003cp\u003eThis Collection currently includes Strut Assembly. Each listing serves its own repair application, so product-specific information remains on the individual product page.\u003c\/p\u003e\u003ch2\u003eCommon Repair Situations\u003c\/h2\u003e\u003cp\u003eRide, handling, steering, vibration, or tire-wear concerns can have more than one cause. Inspect the relevant system and the vehicle configuration before selecting replacement parts.\u003c\/p\u003e\u003ch2\u003eProducts in this Collection\u003c\/h2\u003e\u003cp\u003eBrowse the active listings below for the available product types and item-specific details. For general repair context, visit \u003ca href=\"\/blogs\/guides-advice\"\u003eGuides \u0026amp; Advice\u003c\/a\u003e; for store assistance, visit \u003ca href=\"\/pages\/customer-support-help-center\"\u003eCustomer Support\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"loaded-strut-electronic-shock-kit-2013-2019-cadillac-xts-fwd","title":"4Pcs Electronic Loaded Strut Assemblies for 2013-2019 Cadillac XTS","description":"\u003cp\u003e4Pcs Electronic Loaded Strut Assemblies are designed for 2013-2019 Cadillac XTS and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 4Pcs Electronic Loaded Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory F55 Magnetic Ride Control \/ variable damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front \u0026amp; Rear, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42265363677265,"sku":"COILOVER-XTS13-18-F+R","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-4Pcs_Loaded_Strut_Electronic_Shock_Kit_for_2013-2019_Cadillac_XTS_FWD-main-01.webp?v=1788916781"},{"product_id":"front-magnetic-ride-conversion-strut-kit-2007-2014-cadillac-escalade","title":"2Pcs Front MRC Strut Assemblies for 2007-2014 Cadillac Escalade","description":"\u003cp\u003e2Pcs Front MRC Strut Assemblies are designed for 2007-2014 Cadillac Escalade and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front MRC Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory Magnetic Ride Control \/ MagneRide configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42267342930001,"sku":"COILOVER-CADC0714-F","price":254.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Magnetic_Ride_Conversion_Strut_Kit_for_2007-2014_Cadillac_Escalade-main-01.webp?v=1788341135"},{"product_id":"front-electronic-loaded-strut-kit-2015-2019-lincoln-mkc","title":"2Pcs Front Electronic Loaded Strut Kit for 2015-2019 Lincoln MKC","description":"\u003cp\u003e2Pcs Front Electronic Loaded Strut Kit are designed for 2015-2019 Lincoln MKC and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Electronic Loaded Strut Kit only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Continuously Controlled Damping (CCD) configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42272910147665,"sku":"COILOVER-MKC1419-F","price":234.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Electronic_Loaded_Strut_Kit-main-01.webp?v=1788234208"},{"product_id":"front-loaded-strut-kit-2016-2022-bmw-x1-f48-2-0l","title":"2Pcs Front Passive Loaded Strut Assemblies for 2016-2023 BMW X1","description":"\u003cp\u003e2Pcs Front Passive Loaded Strut Assemblies are designed for 2016-2023 BMW X1 and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Passive Loaded Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Standard passive suspension configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42586329972817,"sku":"COILOVER-X116-23-F","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Loaded_Strut_Kit_for_2016-2022_BMW_X1_F48_2.0L-main-01..webp?v=1788340938"},{"product_id":"front-edc-loaded-strut-kit-2011-2017-bmw-x3-2015-2018-x4","title":"2Pcs Front EDC Loaded Strut Assemblies for 2011-2017 BMW X3 xDrive","description":"\u003cp\u003e2Pcs Front EDC Loaded Strut Assemblies are designed for 2011-2017 BMW X3 xDrive and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front EDC Loaded Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed S223A Electronic Damper Control \/ adaptive suspension configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42588474802257,"sku":"COILOVER-X311-18-F","price":242.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_EDC_Loaded_Strut_Kit_for_2011-2017_BMW_X3_2015-2018_X4-main-01.webp?v=1788340875"},{"product_id":"front-rear-electronic-strut-shock-kit-for-2013-2020-lincoln-mkz","title":"4Pcs Front Rear Electronic Strut Assemblies for 2013-2020 Lincoln MKZ","description":"\u003cp\u003e4Pcs Front Rear Electronic Strut Assemblies are designed for 2013-2020 Lincoln MKZ and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 4Pcs Front Rear Electronic Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed CCD \/ electronically controlled damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front \u0026amp; Rear, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42591548964945,"sku":"COILOVER-MKZ1320-F+R","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-4Pcs_Front_Rear_Electronic_Strut_Shock_Kit_for_2013-2020_Lincoln_MKZ-main-01.webp?v=1789625741"},{"product_id":"front-electronic-loaded-strut-kit-for-2011-2016-cadillac-srx","title":"2Pcs Front Electronic Loaded Strut Kit for 2011-2016 Cadillac SRX","description":"\u003cp\u003e2Pcs Front Electronic Loaded Strut Kit are designed for 2011-2016 Cadillac SRX and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Electronic Loaded Strut Kit only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory F45 electronic damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42592822984785,"sku":"COILOVER-SRX10-16-F","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Electronic_Loaded_Strut_Kit_for_2011-2016_Cadillac_SRX-main-01.webp?v=1788234430"},{"product_id":"front-magnetic-ride-loaded-strut-kit-2015-2020-cadillac-escalade","title":"2Pcs Front MRC Loaded Struts for 2015-2020 Cadillac Escalade","description":"\u003cp\u003e2Pcs Front MRC Loaded Struts are designed for 2015-2020 Cadillac Escalade and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front MRC Loaded Struts only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory Z95 Magnetic Ride Control configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003cli\u003eUses the listed shock absorber type configuration: Gas.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42593006354513,"sku":"COILOVER-CADC1519-F","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Magnetic_Ride_Loaded_Strut_Kit-main-01webp.webp?v=1788170316"},{"product_id":"front-variable-damping-loaded-strut-kit-2016-2018-cadillac-ct6-awd","title":"2Pcs Front Loaded Strut Assemblies for 2016-2018 Cadillac CT6","description":"\u003cp\u003e2Pcs Front Loaded Strut Assemblies are designed for 2016-2018 Cadillac CT6 and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Loaded Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed RPO F55 variable damping; shock code AAVB configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":42597280710737,"sku":"COILOVER-CT616-20-F","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_Variable_Damping_Loaded_Strut_Kit-main.png?v=1788761683"},{"product_id":"front-electronic-loaded-strut-assemblies-lincoln-mkz-ford-fusion","title":"2Pcs Front Electronic Struts for 2013-2020 Ford Fusion","description":"\u003cp\u003e2Pcs Front Electronic Struts are designed for 2013-2020 Ford Fusion and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Electronic Struts only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed CCD \/ electronically controlled damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59265645936721,"sku":"COILOVER-MKZ1320-F","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_Electronic_Loaded_Strut_Assemblies_Kit-main.png?v=1788761758"},{"product_id":"front-edc-shock-coil-spring-assemblies-bmw-x5-x6","title":"2Pcs Front EDC Shock Absorber Strut for 2013-2019 BMW X5 \u0026 X6 xDrive","description":"\u003cp\u003e2Pcs Front EDC Shock Absorber Strut are designed for 2013-2019 BMW X5 \u0026amp; X6 xDrive and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front EDC Shock Absorber Strut only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Electronic Damper Control \/ Variable Damper Control configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59354171375697,"sku":"COILOVER-X513-19-F","price":252.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_EDC_Shock_for_2014-2018_BMW_X5_2015-2018_BMW_X6-main-01.webp?v=1788839871"},{"product_id":"rear-edc-shocks-bmw-x3-x4","title":"2Pcs Rear EDC Shock \u0026 Coil Spring Assemblies for 2011-2017 BMW X3","description":"\u003cp\u003e2Pcs Rear EDC Shock \u0026amp; Coil Spring Assemblies are designed for 2011-2017 BMW X3 and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Rear EDC Shock \u0026amp; Coil Spring Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed S223A Electronic Damper Control \/ adaptive suspension configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Rear, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59354425720913,"sku":"COILOVER-X311-18-R","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Rear_EDC_Shocks_for_BMW_X3_F25_X4_F26-main01.png?v=1788761833"},{"product_id":"front-active-damping-struts-jeep-grand-cherokee-2016-2021","title":"2Pcs Front Active Damping Struts for Jeep Grand Cherokee WK2 2016-2021","description":"\u003cp\u003e2Pcs Front Active Damping Struts are designed for Jeep Grand Cherokee WK2 2016-2021 and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Active Damping Struts only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed WK2 active electronic damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003cli\u003eUses the listed shock absorber type configuration: Gas.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59361724399697,"sku":"COILOVER-JEEP2016-F","price":332.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_Active_Damping_Struts_for_Grand_Cherokee_2016-2021_-main01.webp?v=1788764629"},{"product_id":"front-loaded-struts-2011-2014-ford-f150-raptor-supercrew-6-2l","title":"2Pcs Front Loaded Strut Assemblies for 2011-2014 Ford F-150 SVT Raptor","description":"\u003cp\u003e2Pcs Front Loaded Strut Assemblies are designed for 2011-2014 Ford F-150 SVT Raptor and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Loaded Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed SVT Raptor front suspension configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59365274779729,"sku":"COILOVER-F150-1115-F","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_Loaded_Struts_for_2011-2014_F-150_Raptor_SuperCrew_6.2L-main01.png?v=1788753597"},{"product_id":"2pcs-front-electronic-loaded-strut-assemblies-2014-2019-cadillac-cts-awd","title":"2Pcs Front Electronic Struts for 2014-2019 Cadillac CTS","description":"\u003cp\u003e2Pcs Front Electronic Struts are designed for 2014-2019 Cadillac CTS and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Electronic Struts only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory chassis-control electronic damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59366238060625,"sku":"COILOVER-CTS-AWD-F","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Front_Electronic_Loaded_Strut_Assemblies_for_Cadillac_CTS_AWD_-main-01..webp?v=1788341505"},{"product_id":"2pcs-rear-variable-damping-shock-coil-spring-assemblies-2016-2020-cadillac-ct6","title":"2Pcs Rear Variable Damping Strut Assemblies for 2016-2020 Cadillac CT6","description":"\u003cp\u003e2Pcs Rear Variable Damping Strut Assemblies are designed for 2016-2020 Cadillac CT6 and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Rear Variable Damping Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory chassis-control variable damping configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Rear, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59372827574353,"sku":"COILOVER-CT616-20-R","price":264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-Rear_Variable_Damping_Shock_Coil_Spring_Assemblies-main01.png?v=1788753468"},{"product_id":"toyota-4runner-limited-front-xreas-shocks","title":"2Pcs Front X-REAS Strut Assemblies for 2010-2024 Toyota 4Runner","description":"\u003cp\u003e2Pcs Front X-REAS Strut Assemblies are designed for 2010-2024 Toyota 4Runner and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front X-REAS Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory X-REAS suspension configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59392634552401,"sku":"COILOVER-4RUNNER1024-F","price":474.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_X-REAS_Shocks_with_Springs_for_2010-2024_Toyota_4Runner_Limited-main-01..webp?v=1788341585"},{"product_id":"2pcs-rear-magnetic-ride-loaded-struts-for-2021-2024-gm-full-size-suvs","title":"2Pcs Rear Magnetic Ride Loaded Struts for 2021-2024 GM Full-Size SUVs","description":"\u003cp\u003e2Pcs Rear Magnetic Ride Loaded Struts are designed for 2021-2024 GM Full-Size SUVs and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Rear Magnetic Ride Loaded Struts only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory RPO Z95 Magnetic Ride Control configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Rear, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59399890206801,"sku":"COILOVER-CADC2125-ZC-R","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Rear_Magnetic_Ride_Loaded_Struts_for_GM_SUVs_2021-2024-main-01.png?v=1788340004"},{"product_id":"front-magnetic-ride-shock-absorber-strut-assemblies-for-audi-a3-a3-quattro-s3-rs3-tt-tts-tt-rs-quattro-2015-2023","title":"2Pcs Front Magnetic Ride Strut Assemblies for 2016-2017 Audi TTS","description":"\u003cp\u003e2Pcs Front Magnetic Ride Strut Assemblies are designed for 2016-2017 Audi TTS and support strut service after damping, spring, upper-mount, bearing, or electronic-control wear has been diagnosed. The service scope centers on the stated axle position, side, spring package, mount, and damping-control system.\u003c\/p\u003e\n\u003cp\u003eDuring operation, the strut controls suspension motion and serves as a structural connection; a loaded assembly also carries the matched spring and upper mount. Inspection commonly follows fluid leakage, weakened damping, spring damage, mount noise, bearing wear, or an electronic strut fault. The same inspection should cover the upper mount, bearing, spring seat, steering knuckle, sway link, wiring connector, and alignment settings because wear or damage there can affect the replacement. Follow the application-specific support, fastener-torque, electronic reconnection, and post-installation ride-control checks. Install these 2Pcs Front Magnetic Ride Strut Assemblies only in the stated component position and configuration.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProvides suspension damping while serving as a structural locating member in the strut assembly.\u003c\/li\u003e\n\u003cli\u003eLoaded configurations combine the damper with the stated coil spring and upper mounting components.\u003c\/li\u003e\n\u003cli\u003eMatches the stated front or rear position and application-specific mounting interfaces.\u003c\/li\u003e\n\u003cli\u003eSupports replacement after inspection identifies damper, spring, mount, bearing, or control-system wear.\u003c\/li\u003e\n\u003cli\u003eRetains the listed Factory electronic damping \/ Magnetic Ride configuration.\u003c\/li\u003e\n\u003cli\u003eConfigured for the Front, Left \u0026amp; Right installation position.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Susucar Auto Parts","offers":[{"title":"Default Title","offer_id":59501286260817,"sku":"COILOVER-1522AUDS3-F","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/9354\/4785\/files\/susucar-2Pcs_Front_Magnetic_Ride_Struts_for_Audi_A3S3_RS3_TT_TTS_-main-01..webp?v=1788341240"}],"url":"https:\/\/susucar.com\/collections\/strut-assembly-replacement.oembed?page=2","provider":"Susucar Auto Parts","version":"1.0","type":"link"}